Estimated Product Savings | Per Year | Lifetime | |
---|---|---|---|
Dollars Saved | $84.60 | $1,268.97 | |
Kilowatt Hours Saved | 717 | 10,754 | |
Gallons of Water Saved | 0 | 0 | |
Trees Planted | 0 | 6 |
VendingMiser® EZ (Secondary with Cable)
Vending machines typically run 24 hours a day, whether anyone is likely to use the machine or not. By powering down the machine when it is not needed, energy consumption can be significantly reduced. The VendingMiser EZ uses a passive infrared sensor (PIR) to power down a refrigerated vending machine when no one has been within 25' of the machine for 15 minutes. It continues to monitor the room’s temperature, automatically repowering the cooling system at 1 to 3 hour intervals, dynamically adjusting based on the ambient temperature to ensure the product stays cold. To reduce wear and tear on the machine, the microcontroller will never power down the machine while the compressor is running, eliminating compressor short-cycling. In addition, when the machine is powered up, the cooling cycle is allowed to finish before again powering down. VendingMiser EZ is a simple external plug-and-play product, able to be installed directly onto the vending machine with Velcro®. One VendingMiser EZ preassembled for installation is included. To control multiple machines (up to 4), a VendingMiser EZ may be purchased without the PIR Sensor and controlled from the PIR sensor of the primary VendingMiser EZ by the 10' repeater cable.